EDIT: It was a firewall issue. I disabled my firewall and it works.
The site loads properly on serverIP:5870 and if I change proxy_pass http://127.0.0.1:5870; to proxy_pass http://listmonk.mydomain.com:5870; then it will load on listmonk.mydomain.com:5870. But it gives the 502 error when I visit the site without the port.
If I set proxy_pass http://127.0.0.1:5870; and visit listmonk.mydomain.com:5870 I get:
The connection for this site is not secure
listmonk.mydomain.com sent an invalid response.
[Try running Windows Network Diagnostics](javascript:diagnoseErrors()).
ERR_SSL_PROTOCOL_ERROR
docker-compose.yml:
version: "3.7"
x-app-defaults: &app-defaults
restart: unless-stopped
image: listmonk/listmonk:latest
ports:
- "5870:9000"
networks:
- listmonk
environment:
- TZ=Etc/UTC
x-db-defaults: &db-defaults
image: postgres:13
ports:
- "9432:5432"
networks:
- listmonk
environment:
- POSTGRES_PASSWORD=pw
- POSTGRES_USER=listmonk
- POSTGRES_DB=listmonk
restart: unless-stopped
healthcheck:
test: ["CMD-SHELL", "pg_isready -U listmonk"]
interval: 10s
timeout: 5s
retries: 6
services:
db:
<<: *db-defaults
container_name: listmonk_db
volumes:
- type: volume
source: listmonk-data
target: /var/lib/postgresql/data
app:
<<: *app-defaults
container_name: listmonk_app
depends_on:
- db
volumes:
- ./config.toml:/listmonk/config.toml
- ./uploads:/listmonk/uploads
networks:
listmonk:
volumes:
listmonk-data:
nginx config:
server {
listen 443 ssl;
server_name listmonk.example.com;
location / {
proxy_pass http://127.0.0.1:5870;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
}
server {
listen 80;
server_name listmonk.example.com;
location / {
return 301 https://$host$request_uri;
}
}
the purpose of using nginx is to not have to use the port number in this scenario, the reason it works is because your DNS for that hostname still points to that machine that both containers are running on. Normal DNS A and cname records do not contain port information.
The 502 bad gateway error means that nginx is not able to connect to the upstream host for that hostname, this is where you need to use the port for the other container (5870). Do know that using localhost in docker will not have the results you are expecting, if these are on the same host you can use the name you have configured for the container as the hostname in nginx otherwise use the host IP, in your case it would be http://listmonk_app:5870.
Hope that helps!
Thanks! I was using 127.0.0.1 because that’s what other people were successfully using: https://github.com/knadh/listmonk/issues/1590#issuecomment-1812399067. I had tried variations of
proxy_pass http://app:5870;because I’m running listmonk successfully on another server usingproxy_pass http://app:9000;, but that is when nginx is running from inside the docker container:services: db: <<: *db-defaults container_name: listmonk_db volumes: - type: volume source: listmonk-data target: /var/lib/postgresql/data app: <<: *app-defaults container_name: listmonk_app depends_on: - db volumes: - ./config.toml:/listmonk/config.toml - ./listmonk/uploads:/listmonk/uploads nginx: image: nginx:mainline-alpine restart: unless-stopped ports: - "80:80" - "443:443" volumes: - ./data/nginx:/etc/nginx/conf.d - ./data/certbot/conf:/etc/letsencrypt - ./data/certbot/www:/var/www/certbot networks: - listmonk depends_on: - app command: "/bin/sh -c 'while :; do sleep 6h & wait $${!}; nginx -s reload; done & nginx -g \"daemon off;\"'" certbot: image: certbot/certbot restart: unless-stopped container_name: certbot volumes: - ./data/certbot/conf:/etc/letsencrypt - ./data/certbot/www:/var/www/certbot networks: - listmonk depends_on: - nginx entrypoint: "/bin/sh -c 'trap exit TERM; while :; do certbot renew; sleep 12h & wait $${!}; done;'"I forgot to try
proxy_pass http://listmonk_app:5870;though. I just tried that and I got the same error that I get withproxy_pass http://app:5870;.Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.systemctl status nginx.service ● nginx.service - Centmin Mod NGINX Server Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled) Drop-In: /etc/systemd/system/nginx.service.d └─failure-restart.conf, openfileslimit.conf Active: failed (Result: start-limit) since Sun 2023-11-26 01:07:52 UTC; 1min 57s ago Process: 34289 ExecStop=/bin/sh -c /bin/kill -s TERM $(/bin/cat /usr/local/nginx/logs/nginx.pid) (code=exited, status=0/SUCCESS) Process: 18426 ExecReload=/bin/sh -c /bin/kill -s HUP $(/bin/cat /usr/local/nginx/logs/nginx.pid) (code=exited, status=0/SUCCESS) Process: 25700 ExecStart=/usr/local/sbin/nginx -c /usr/local/nginx/conf/nginx.conf (code=exited, status=0/SUCCESS) Process: 34339 ExecStartPre=/usr/local/sbin/nginx -t (code=exited, status=1/FAILURE) Main PID: 25702 (code=exited, status=0/SUCCESS) Nov 26 01:07:47 centos7test systemd[1]: nginx.service: control process exited, code=exited status=1 Nov 26 01:07:47 centos7test systemd[1]: Failed to start Centmin Mod NGINX Server. Nov 26 01:07:47 centos7test systemd[1]: Unit nginx.service entered failed state. Nov 26 01:07:47 centos7test systemd[1]: nginx.service failed. Nov 26 01:07:52 centos7test systemd[1]: nginx.service holdoff time over, scheduling restart. Nov 26 01:07:52 centos7test systemd[1]: Stopped Centmin Mod NGINX Server. Nov 26 01:07:52 centos7test systemd[1]: start request repeated too quickly for nginx.service Nov 26 01:07:52 centos7test systemd[1]: Failed to start Centmin Mod NGINX Server. Nov 26 01:07:52 centos7test systemd[1]: Unit nginx.service entered failed state. Nov 26 01:07:52 centos7test systemd[1]: nginx.service failed.journalctl -xe -- -- The result is timeout. Nov 26 01:08:56 centos7test systemd[1]: Dependency failed for /mnt/HC_Volume_33691542. -- Subject: Unit mnt-HC_Volume_33691542.mount has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit mnt-HC_Volume_33691542.mount has failed. -- -- The result is dependency. Nov 26 01:08:56 centos7test systemd[1]: Job mnt-HC_Volume_33691542.mount/start failed with result 'dependency'. Nov 26 01:08:56 centos7test systemd[1]: Job dev-disk-by\x2did-scsi\x2d0HC_Volume_33691542.device/start failed with result 'timeout'. Nov 26 01:09:01 centos7test systemd[1]: Started Session 313 of user root. -- Subject: Unit session-313.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-313.scope has finished starting up. -- -- The start-up result is done. Nov 26 01:09:01 centos7test CROND[34567]: (root) CMD (/usr/lib64/sa/sa1 1 1) Nov 26 01:09:10 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=85.203.42.26 DST= LEN Nov 26 01:09:35 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=205.185.121.3 DST= LE Nov 26 01:09:45 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=107.148.82.29 DST= LE Nov 26 01:09:53 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=62.204.41.118 DST= LE Nov 26 01:10:01 centos7test systemd[1]: Started Session 314 of user root. -- Subject: Unit session-314.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-314.scope has finished starting up. -- -- The start-up result is done. Nov 26 01:10:01 centos7test systemd[1]: Started Session 315 of user root. -- Subject: Unit session-315.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-315.scope has finished starting up. -- -- The start-up result is done. Nov 26 01:10:01 centos7test CROND[34680]: (root) CMD (/usr/lib64/sa/sa1 1 1) Nov 26 01:10:01 centos7test CROND[34679]: (root) CMD (/usr/lib64/sa/sa1 1 1) Nov 26 01:10:11 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=91.92.246.145 DST= LE Nov 26 01:10:12 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=85.203.42.26 DST= LEN Nov 26 01:10:21 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=85.209.11.142 DST= LE Nov 26 01:10:22 centos7test sshd[34734]: Received disconnect from 180.101.88.196 port 14758:11: [preauth] Nov 26 01:10:22 centos7test sshd[34734]: Disconnected from 180.101.88.196 port 14758 [preauth] Nov 26 01:10:40 centos7test kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC= SRC=162.216.150.164 DST= lines 1377-1425/1425 (END)
I wrote this a while back. Maybe it can help https://www.reddit.com/r/homelab/comments/arx2qe/tutorial_reverse_proxy_with_nginx/
502 usually means it’s having a hard time hitting the service on the back end. Are you able to access listmonk directly without the reverse proxy? What is the URL I. The browser when you do that?
Is listmonk on the same server as nginx? Is nginx running in a container? If nginx is running in a container, 127.0.0.1 would try to load from inside the nginx container which isn’t where listmonk is. Use the LAN IP address of the docker host listmonk is on instead of 127.0.0.1.
Thanks, I checked out your link. I think my most recent comment below answers some of your questions. https://lemmy.world/comment/5586470
Are you able to access listmonk directly without the reverse proxy? What is the URL I. The browser when you do that?
Besides the info I put in the OP, I’m not sure what else you’re asking.
LAN IP address of the docker host
No idea what this is, so I looked it up https://www.howtogeek.com/devops/how-to-get-a-docker-containers-ip-address-from-the-host/ and ran
docker psthen put the container ID at the end of thisdocker inspect -f '{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}' docker-container-ID. It output an IP address which I used forproxy_pass http://docker-IP:5870;, restarted nginx, and nothing seems to have changed.Not the docker container IP. The IP of the machine you are running docker itself on. Nginx is running in a container, it’s not allowed to talk to the other docker container IP directly and it has a separate network stack from the listmonk container, so 127.0.0.1 only goes back to nginx.
Say your machine that you are running docker on is 192.168.0.67, the listmonk docker container is 172.16.0.89, and nginx container has an IP of 172.16.0.34.
Your nginx config would need the proxy to point to 192.168.0.67:5870.
Then make sure you don’t have ufw or some similar firewall blocking the connection from nginx to listmonk.
Nginx is running in a container
I don’t think it is. On my other machine it’s running in the docker container, but not this one.
Using serverIP:5870 has the same result as using listmonk.mysite.com:5870. It loads a broken page https://i.stack.imgur.com/gIy4A.jpg with broken links. IE: the URLs are
http://localhost:9000/subscription/form.
It was a firewall issue. I disabled my firewall and it works.
I tried some of the solutions here https://serverfault.com/questions/351212/nginx-redirects-to-port-8080-when-accessing-url-without-slash
proxy_set_header Host $host:$server_port;didn’t seem to change anything.I also tried
proxy_pass http://listmonk.example.com:5870/; proxy_redirect http://listmonk.example.com:5870/ http://listmonk.example.com/;Maybe this https://stackoverflow.com/questions/30097334/nodejs-on-nginx-not-working-without-a-port-number-in-the-url is the answer, but I don’t understand it.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System HTTP Hypertext Transfer Protocol, the Web IP Internet Protocol nginx Popular HTTP server
[Thread #302 for this sub, first seen 26th Nov 2023, 05:15] [FAQ] [Full list] [Contact] [Source code]
deleted by creator
