The camera can record 1080p60, 1080p50, 1080p24, 1080p30, 1080p25, 1080i50, and 1080i60 as well as some 720p and 4k resolutions it takes regular SD cards that do no processing and is able to run android apps (playmemories).
don’t think you know what you’re talking about.
Can you confirm that it is a 2015 Sony Alpha 7RII?
Just to make sure I’m checking the correct manual. If it is, it can indeed do all of those stuff, but the manual state some very specific limitations when recording 24fps and it also warns the user directly that changing between NTSC/PAL requires a reformat of the SD card and that some video options will not be available depending on the mode the camera is in. (I linked at some captures here.)
Also, the red flag is that those old HD versions come in progressive and interlaced flavors. That is the giveaway of the time that the camera is from. You did realize there’s no 24 fps interlaced? it is because of all the things I said above. It only does 24fps in progressive, which locks the camera to NTSC mode for both file formatting and capture. You’ll notice that cameras made after 2020 (or thereabouts) no longer use the little i or p after vertical resolutions. Because they switched to H.265 or HEVC, which doesn’t provide progressive or interlaced frames for video compression (technically it is all progressive now, but since there’s no longer a need for interlaced, it is just not mentioned). Today it is more common that they are referred simply as 1080 or just FHD. While 720 is now just HD and 4k stayed just 4k since there was never a need for interlacing 4k.
Here’s my suspicions after all the discussion on this thread:
The engineers had to change some internal workings for compatibility with PAL, most likely the CMOS sensor clock for the rolling shutter, and for some reason this also forced the camera to reinitialize completely, including the file storage. Thus, rather than implementing a fix, they just let the camera force a card reformat on the user. It seems sloppy because it is. It seems it was just easier to let the camera reformat the storage for every change. It is probably unnecessary for a change between NTSC/PAL modes but it was just easier to just let it be. Since most users will not need to change often, usually you just set the camera to your local mode once and live with it. They definitely didn’t intended for users to flip flop between modes.
This blob of text:
• Movies recorded in the [60p 28M(PS)]/[50p 28M(PS)]/[60i 24M(FX)]/[50i
24M(FX)]/[24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are converted by PlayMemories Home in order to create an AVCHD recording disc. This conversion can take a long time. Also, you cannot create a disc in the original
image quality. If you want to keep the original image quality, store your movies on a Blu-ray Disc. [p. 78]
Tells me that there’s some limitations with how files are handled for conversion. Since Blu-ray inherited several historical limitations from the DVD era for compatibility. Including support for NTSC/PAL analog TVs. A lot of this is holdover from a bygone era. The HDMI out port might’ve actually also forced this limitation, since HDMI was still tied to modes back then, for the same compatibility with old ways of processing video signals.
The MP4 limitation to 4GB files tells me there’s something funky or peculiar about how the camera formats the cards as well. Anyway, only the engineers know for certain why they decided to let things be that way. As I said, it is not rare for sensor and image processor to be lock stepped, it saves on resources and simplifies (usually accelerating) image signal processing. But it does brings about these sort of quirks.
It seems that if you must record 24fps you have to use NTSC mode. But if you want to synchronize with PAL to avoid flickering lights (only relevant with fluorescent and incandescent lights, or recording screens) you are forced to 25 or 50 fps.
The camera can record 1080p60, 1080p50, 1080p24, 1080p30, 1080p25, 1080i50, and 1080i60 as well as some 720p and 4k resolutions it takes regular SD cards that do no processing and is able to run android apps (playmemories). don’t think you know what you’re talking about.
Can you confirm that it is a 2015 Sony Alpha 7RII?
Just to make sure I’m checking the correct manual. If it is, it can indeed do all of those stuff, but the manual state some very specific limitations when recording 24fps and it also warns the user directly that changing between NTSC/PAL requires a reformat of the SD card and that some video options will not be available depending on the mode the camera is in. (I linked at some captures here.)
Also, the red flag is that those old HD versions come in progressive and interlaced flavors. That is the giveaway of the time that the camera is from. You did realize there’s no 24 fps interlaced? it is because of all the things I said above. It only does 24fps in progressive, which locks the camera to NTSC mode for both file formatting and capture. You’ll notice that cameras made after 2020 (or thereabouts) no longer use the little i or p after vertical resolutions. Because they switched to H.265 or HEVC, which doesn’t provide progressive or interlaced frames for video compression (technically it is all progressive now, but since there’s no longer a need for interlaced, it is just not mentioned). Today it is more common that they are referred simply as 1080 or just FHD. While 720 is now just HD and 4k stayed just 4k since there was never a need for interlacing 4k.
It’s in pal mode currently, and these are the supported resolutions.
Here’s my suspicions after all the discussion on this thread:
The engineers had to change some internal workings for compatibility with PAL, most likely the CMOS sensor clock for the rolling shutter, and for some reason this also forced the camera to reinitialize completely, including the file storage. Thus, rather than implementing a fix, they just let the camera force a card reformat on the user. It seems sloppy because it is. It seems it was just easier to let the camera reformat the storage for every change. It is probably unnecessary for a change between NTSC/PAL modes but it was just easier to just let it be. Since most users will not need to change often, usually you just set the camera to your local mode once and live with it. They definitely didn’t intended for users to flip flop between modes.
This blob of text:
Tells me that there’s some limitations with how files are handled for conversion. Since Blu-ray inherited several historical limitations from the DVD era for compatibility. Including support for NTSC/PAL analog TVs. A lot of this is holdover from a bygone era. The HDMI out port might’ve actually also forced this limitation, since HDMI was still tied to modes back then, for the same compatibility with old ways of processing video signals.
The MP4 limitation to 4GB files tells me there’s something funky or peculiar about how the camera formats the cards as well. Anyway, only the engineers know for certain why they decided to let things be that way. As I said, it is not rare for sensor and image processor to be lock stepped, it saves on resources and simplifies (usually accelerating) image signal processing. But it does brings about these sort of quirks.
It seems that if you must record 24fps you have to use NTSC mode. But if you want to synchronize with PAL to avoid flickering lights (only relevant with fluorescent and incandescent lights, or recording screens) you are forced to 25 or 50 fps.