Solar Bear

And of that 61%, only a third are directly investing. The rest get it as part of their compensation package for their work, which they can’t benefit from without penalty until retirement. Additionally, it skews heavily by race. It’s 66% of white families, but only 39% of black families and 28 percent of hispanic families. The amount invested follows similar trends.

https://www.pewresearch.org/short-reads/2024/03/06/a-booming-us-stock-market-doesnt-benefit-all-racial-and-ethnic-groups-equally/

Actually most of us work for a living and don’t have the luxury of having enough money for investments to be practical in the first place, but I guess you can pretend it’s necessary to get by if it makes you feel better about it.

Whatever you get for your NAS, make sure it’s CMR and not SMR. SMR drives do not perform well in NAS arrays.

I just want to follow this up and stress how important it is. This isn’t “oh, it kinda sucks but you can tolerate it” territory. It’s actually unusable after a certain point. I inherited a Synology NAS at my current job which is used for backup storage, and my job was to figure out why it wasn’t working anymore. After investigation, I found out the guy before me populated it with cheapo SMR drives, and after a certain point they just become literally unusable due to the ripple effect of rewrites inherent to shingled drives. I tried to format the array of five 6TB drives and start fresh, and it told me it would take 30 days to run whatever “optimization” process it performs after a format. After leaving it running for several days, I realized it wasn’t joking. During this period, I was getting around 1MB/s throughput to the system.

Do not buy SMR drives for any parity RAID usage, ever. It is fundamentally incompatible with how parity RAID (RAID5/6, ZFS RAID-Z, etc) writes across multiple disks. SMR should only be used for write-once situations, and ideally only for cold storage.

Refurbished drives get their SMART data reset during the process, they absolutely had more than that originally.

If you’re waiting for Jellyfin to run some kind of relay like Plex, you’ll be waiting a long time. That takes a lot of money to upkeep, and the demand for people who self-host FOSS and then want to depend on an external service is very minimal, certainly not enough to sustain such a service. I’d recommend just spending a weekend afternoon learning how to set up Nginx Proxy Manager and being done with it, the GUI makes it very easy.

I chose Bookstack for the same situation. It’s dead simple in usage and maintenance. No issues yet!

I will have an OG Xiaomi Mi Box and it’s absurd how over the years it went from a purely functional media device to a complete shit show covered ads. Genuinely disgusted me every time I turned the TV on. I couldn’t stand it anymore, I had to tear out the launcher with ADB and replace it with FLauncher.

I wish Kodi wasn’t such a pain in the ass to deal with, especially for YouTube. We really need a new FOSS media center application. Until then, at least FLauncher works for now as a simple app switcher for a handful of Android apps.

Recently started using Tempo with Navidrome. Haven’t had more than a few days of use yet, but everything has worked exactly as expected! Can’t ask for much more than that.

I very recently started using borgbackup. I’m extremely impressed with how much it compressed the data before sending, and how well it detects changes and only sends the difference. I have not yet attempted a proper restore from backup, though.

I have much less data I’m currently securing (~50gb) and much more uplink bandwidth (~115mbps) so my situation isn’t nearly as dire. But it was able to compress that down to less than 25gb before sending, and after the initial upload, the next week’s backup only required about 100mb of data transfer.

If you can find a way to seed your data from a faster location, reduce the amount you need to back up, and/or break it up into multiple smaller transfers, this might be an effective solution for you.

Borgbase’s highest plan has an upper limit of 8TB, which you would be brushing right up against, but Hetzner storage boxes go up to 20TB and officially support Borg.

Outside of that, if you don’t expect the data to change often, you might be looking for some sort of cheap S3 storage from AWS or other similar large datacenter company. But you’ll still need to find a way to actually get them the data safely, and I’m not sure if they support differential uploads like Borg does.

The goal here is to make it difficult to link to things uploaded to discord from outside of discord. The malware reason is BS. If they wanted to curb malware it would be as easy as making it a nitro feature. What that doesn’t fix is all the people piggybacking on discord as a free CDN.

Discord isn’t even wrong for doing this. I just resent their dishonesty.

Why doesn’t Israel stop doing things that require other countries to intervene

Convincing argument, but unfortunately a cursory Google search will reveal he was right. There is very little CPU overhead. The only real consideration is a bite extra storage and RAM to store and load the redundant dependencies of the container.

While that isn’t false, defaults carry immense weight. Also, very few have the means to host at scale like Docker Hub; if the goal is to not just repeat the same mistake later, each project would have to host their own, or perhaps band together into smaller groups. And unfortunately, being a good programmer does not make you good at devops or sysadmin work, so now we need to involve more people with those skillsets.

To be clear, I’m totally in favor of this kind of fragmentation. I’m just also realistic about what it means.

Never trust corporations. If you’re not profitable, they will abandon you. Only trust community-driven projects with a true open source commitment.

Proxmox is completely different from Docker. Proxmox is focused on VMs, and to a lesser extent LXC containers. If you think you will have a need to run VMs (for example, a Windows VM for a game server that doesn’t support Linux) Proxmox is great for that.

I run Docker on a dedicated VM inside Proxmox, and then I spin up other specialized VMs on the same system when needed. The Docker VM only does Docker and nothing else at all.

because of the check against darkweb leaks or whatever type feature when you pay. That’s seems like an anti privacy thing. I understand it’s a good idea albeit seems to expose a lot of information about you

For the password leak checks, your passwords are never transmitted. They are one-way hashed locally, and then only the first few characters of the hash are checked against the API provided at https://haveibeenpwned.com which is run and designed by Troy Hunt, one of the most respected people in the cybersecurity industry. He collects major password breaches and makes them available to check against without actually exposing the data. It’s perfectly safe and secure.

I use Portainer a lot and have no issues with it. There’s very little you can’t do without Portainer though, it’s just a convenient web frontend to access Docker tools. It’s helpful if you manage a lot of stuff or multiple hosts. I also use it at work to expose basic management to members of my team who aren’t Linux or Docker savvy.

We all go down this hole at the start. The truth is, you should only reserve IPs if you actually need it to stay the same. You don’t need to check IPs as often as you think, I promise. The only segmentation and planning you should do for a home network is for subnets/vlans; LAN, Guest, IOT, Server, etc.

Instead of managing the IP addresses, just manage hostnames. Make sure every device with a customizable hostname is easily identifiable. This will help you so much more in the long run.

That’s what I do. All my IOT stuff that I can’t get wired or via Zigbee/Z-Wave goes on a separate VLAN along with my Home Assistant server. I have an mDNS repeater for ease of access to TV stuff via apps (might spin TVs off into its own VLAN, just haven’t gotten around to it) but a 1-way firewall rule that only allows the main network to initiate connections. Certain devices which don’t need internet at all get static IPs and completely firewalled.

It’s a docker container that runs an OpenVPN/Wireguard client in order to provide a connection for other containers, yes.