The app works well enough but was unable to watch anything I downloaded offline on iOS. Has anyone experienced this and found a fix? I downloaded from the App Store, not Test Flight.
The app works well enough but was unable to watch anything I downloaded offline on iOS. Has anyone experienced this and found a fix? I downloaded from the App Store, not Test Flight.
This. I used a P1000 for transcoding and eventually switched to a 12th gen Intel chip with integrated UHD 770 graphics. It completely blew me away. Insanely low power draw and barely breaks a sweat transcoding multiple streams. Consider this route over a GPU if you can.
Really cool list. Thank you for sharing!
deleted by creator
This guy is a great resource for Home Assistant and other smart home tech. I would start here https://youtu.be/ooFvyudbxNE?si=WzYS1IIyVS5TkmZ9
I appreciate the info! My 12500 has been great to be honest but 13th gen just seems like such a performance jump with the same power draw. The Intel UHD 770 is a beast of an iGPU. I’ve had it for a couple years now and I am still blown away by the efficiency and quality compared to the P1000 that I had before.
The extra cores do sound sweet huh? I’m gonna set up a price watch. Will report back if I do it.
Good point. Most of the info I see related to unraid and 13th gen is “it works fine” but would love more details. I am also very curious about unraid being able to make use of p vs e cores. Thanks for the input!
Thank you for the reply! I am probably in the same boat as you when it comes to tangible energy/cost savings but was curious. Maybe if I can catch a deal and get a decent amount for my existing CPU, I’ll pull the trigger
I absolutely love Zooz. Their customer service is fantastic and products just work, if you can provide proper Z-Wave coverage. If you prefer WiFi, I have several Shelly products behind traditional switches that have been rock solid.
I haven’t had this issue specifically but I’ve noticed when adding color changing bulbs, the color changing ability doesn’t show up in Home Assistant until I change the color in the dashboard of zigbee2mqtt. After that, home assistant recognizes the bulb’s capabilities. What hub do you have?
Do you have Nginx on the same bridge as Overseerr? If you have multiple docker networks, they need to be on the same so they can discover one another. That bridge also needs internet access so you can generate the cert. Hope this helps
All hail the master https://youtu.be/znSu_FuKFW0?si=3zbwqKA6OpIMPc35
Just updated from 6.12.4 with no issues
To be honest, I don’t do anything super special with my Hue bulbs but after adjusting the transition period, I can barely notice any difference, except that they respond more quickly and consistently on Zigbee2MQTT. Anything in particular you’re curious about?
The Hue motion sensors are great and can run on Zigbee in lieu of the Hue bridge. I just transitioned my setup to Zigbee2MQTT after hearing their future account requirement and am very happy with the results. Same can be said for their light bulbs for that matter. I have multiple Reolink cameras and love them. You get a lot of bang for your buck and I send all the data to an FTP server so no cloud required.
I see quite a few on eBay. I would ask the seller if it has an ESP Wi-Fi chip to be sure it can be flashed
I bought the Govee leak detectors and paired them with a Tasmota flashed Sonoff RF Bridge 433. They’ve already saved me multiple times from leaks that would’ve gotten out of control without me being notified. The Sonoff Bridge can’t be flashed with Tasmota as readily as before but you can probably find a compatible version somewhere
I use the Sonoff RF Bridge flashed with tasmota https://sonoff.tech/product-document/gateway-and-sensors-doc/rfbridge-doc/. It’s been rock solid. It looks like there are newer versions that can’t be flashed so do some research before buying. For IR, I purchased a Tuya IR Wi-Fi device and replaced the Wi-Fi chip with an ESP-12f flashed with Tasmota. The process isn’t the easiest but I’m happy with the results. This is the device I bought: https://www.ebay.com/itm/144473686315?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=z4O68KxtR8S&sssrc=4429486&ssuid=aQmoJOvlQJy&var=&widget_ver=artemis&media=COPY. Range is good but placement is key due to how the IR blasters are positioned. Good luck!
He actually patched it already. WOW!!! So happy to have offline transcoded files back after leaving Plex!