Is the NIC built into the motherboard or an add on pcie card?
You could check the journal to see if the logs tell you anything.
Is the NIC built into the motherboard or an add on pcie card?
You could check the journal to see if the logs tell you anything.
You could try taking some packet captures from opnsense and your server while accessing your externally available web server. Reviewing the pcaps might give you some hints on how fix it based on what behaviour you see in the captures.
This is how I would do it also, assuming you aernt passing the NICs through to VMs
Once you change your DNS server in your router, make sure to renew your clients DHCP lease. It may still be using the stale DNS server. On windows verify its using the new DNS server with: ipconfig /all
I like Language Transfer. It’s free and you can download the episodes for offline listening.
deleted by creator
A custom router + managed switch is a great way to learn. Studying the fundamentals is also good, but in my opinion it’s not as fun as setting up your own network and learning hands-on.
If you decide to go this route I highly reccomend taking regular backups of your config (and backup again before you change stuff). Part of learning involves breaking things - trust me you will break your network - and in networking that’s one of the best ways to learn. Backups will give you an easy way to restore to a known working configuration.
deleted by creator
Yes. A unifi ap connects all my wireless devices to my LAN
Yes its my main router. Everything comes into the laptop across one interface setup as a trunk that includes vlans for WAN, LAN, etc. From there proxmox has a vlan aware linux bridge setup that connects to all the VMs/containers that I run. The VM virtual interfaces get tagged with whatever network I want the host to be part of.
I have a laptop motherboard setup with proxmox running:
This is running on an i5-1135 with 40gigs of memory. If your frugal about how you have stuff setup you can pack alot of services into old laptops.
If your VPS can connect to your home router as a client it sounds like your wireguard server on opnsense is working correctly.
Might be a problem with your phones WG config. Have you tried taking the client .conf file from your VPS and loading it onto your phone to test a working config file?
Just because your using a VPN doesn’t mean you can’t isolate hosts to a separate network. I keep my services in a different VLAN and I can route/firewall traffic between that network and anywhere else as I please.
That’s true. I only use my vpn when I’m out of the house. And the only devices I have with me are my phone/laptop which both have official apps.
In android, for the wireguard/openvpn apps, you can add a button to your swipe down menu (where you toggle on/off wifi, flashlight, etc).
What’s so inconvenient about a VPN?
For future reading this “multiplexing” is called SNI inspection/routing and it can only be used when TLS/SSL is in use.
I didn’t enjoy it at first, but seeing progress in my weightlifting encouraged me a ton. Eventually I did start enjoying the actual workout, and if I skip a day it feels like something is missing.
Ive been lifting for about 4 years, it took 6-12 months for me to start enjoying the process.
I’ve had my fw 13 since early Feb 2022. So far, I’ve replaced the hinges and upgraded to a new mainboard. (11th gen i5 to 12 gen i7 when it became my main PC).
I’ve redone the thermal paste on the 12th gen 2 times already to clean the fan out and have not had any problems opening things up. I open it up so often to tinker that the pull loop on the keyboard cable finally broke on me a few weeks ago.
My old mainboard is currently running my entire homlab. Opnsense, pihole, Plex, Kavita, audiobookshelf, foundry vtt, *arrs, unifi controller. I threw it into a 3d printed case and its been running fine without any issues.
I thought about upgrading to the fw16, but it’s too expensive for me to justify it. If I want to game I just plug into my eGPU. I don’t need my gaming system to be ultra portable.
I’ll probably upgrade again when they release a new ryzen mainboard that has USB 4 2.0 support so I can take advantage of the additional pcie bandwidth for my GPU.
I would reccomend the fw13 to anyone who is into customizing PCs or is passionate about repairability in the electronics they own.