That can be done, just takes a more expensive Platten motor, and some more code in the control unit.
That can be done, just takes a more expensive Platten motor, and some more code in the control unit.
You can get “freezers” that will put part of their inside down to 250+c below their surroundings. (Helium cryocoolers)
If you’re very careful you can remove heat with electromagnetic energy.
Think of heat like someone on a rope swing, and electromagnetic energy as a push.
If you time, and angle your pushes very carefully you can slow the person on the swing. But it’s much easier to speed them up. Same with electromagnetic energy.
It could easily be done, but would only work if: you don’t stop the cycle manually by opening the door, or you are ok with the microwave quickly spinning your food (or liquid filled cup) to the starting position as soon as you do open the door.
Consentually… Sounds like a great way for a corporation to groom individuals into people who accept less than a liveable wage.
I don’t see anything that helps capitalism being done “responsibly”. It’s all done in the pursuit of all the money, and as soon as possible. Only rule is don’t break laws that have consequences higher than the profits gained.
Self fulfilling prophesy that works to generate more profit for the company.
But they are allowed to lie to you, and allowed to pull you over for perceived infractions. So, yes they can pull you over for “nothing”.
Also the fact that if you use a shared machine at all to login, it’s best practice to intentionally log out of everything, and clear cookies/cache when you’re done.
Proton has stopped the “visionary” that allows SMTP, now it’s only available in business accounts. :( I tried setting up the bridge CLI, but so far haven’t been able to get it to send anything after logging in and syncing the account, Maybe I’ll try again once I’ve got some things off my plate.
Setup rules that forward to an IP:port I used a guide on smarthomebeginner initially. I’ll try and find it found it.
Go here https://www.smarthomebeginner.com/traefik-docker-compose-guide-2022/
And scroll till the section. “Adding non-docker or external apps behind Traefik”
Time to code your own thermostat.
An esp32, a 4x or 8x relay board, and a 24vac to 5vdc rectifier/regulator and you’re golden.
Even has WiFi ;)
Semiconductor mfg firesales.
Or if you want to spend the 20+k you can buy from the manufacturer.
Oh power usage… that depends how much you need to cool down, and what setup you have. But usually they’re 3 phase and lots of amps…