ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures

Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters

JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost

Probably not.

However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily

Really nice to see improcements being made to local voice control.

I personally haven’t opted for it yet due to the computing reqirements - instead been looking into dedicated offline voice recognition modules, since they use much less power. Downside is that they recognise a mostly predefined set of commands, and are just looking for patterns in speech instead of actually performing voice recognition

Would be interesting to compare the two voice control approaches side by side at some point

Precisely this

Mine can also dehydrate food super quickly with a variable fan speed, which my traditional oven can’t do without burning through a ton of unnecessary energy

Micromobility is pretty active if you’re interested in product coverage and news. As for more organic content, it’s pretty infrequent in any of the existing bicycle communities ☹️

I used to use MQTT, static_status and Healthchecks.io, and have that data passed through to Home Assistant, but it started to get pretty cumbersome as the amount of machines I had grew.

I now use just Zabbix and HealthchecksIO. I did need to spend some time writing new templates for some additional data I wanted to collect (like SMART data for SSDs that provide health metrics in non-standard attributes, and HealthchecksIO so I could see the status of various checks on my zabbix dashboard)

Zabbix also has some additional features I found appealing, like proxies that can continue recording data when the main server is down, and built in encryption. Some checks like open ports/icmp responses etc can be checked using either the local agent, the remote server, or both, which helps quickly diagnose things like firewall config issues.

I did look at some other solutions, but I wanted something integrated to hit the ground running. Mobile apps are very limited, and there is no official one to my knowledge. I use Moobix which I don’t believe is FOSS - but I could be wrong there

Try each solution out and see what works best for you!

Are you planning to make your own OS for the watch? If so, there’s another smartwatch project called the “SQFMI Watchy” which is an esp32 combined with an e-ink display, RTC and some other sensors.

While I would highly suggest supporting the creators, there are clones on Aliexpress that may more readily ship out to your country

Never knew Wendover and HAI were run by the same person, wow 😳

🏴‍☠️

Seems way more effective than LibreAV, which just looks at app permissions

Music artists? Bands? Mountain names? Types of peppers? Either one would spice things up a bit I think lol

Something is wrong with the tagginator in this thread, seems to be creating dupe posts every 1 min?

@db0@lemmy.dbzer0.com

The nightmare PS2 dirty disc screen, and mainstream multiplayer games without anticheat rootkits

Edit: mainstream

Yepp sorry - what I meant was bundling multiple different root domains, e.g. example.com & example1234567.org in the same cert.

I currently do as you mentioned above, renewing with just one root bundled with its accompanying subdomain wildcard.

If anyone is interested in mitigation, the only way around this AFAIK is to start with a brand new domain, only use wildcard certs (with DNS validation), and don’t bundle multiple renewals into a single cert.

Also, don’t enter your domain or related IP address into dns reverse engineering tools (like dnsdumpster), and check certificate transparency logs (https://crt.sh) to see what information related to your cert renewals has been published.

This won’t stop automated bots from scanning your ip for domains, but should significantly reduce the amount of bots that discover them

Curious about your reasoning, especially as I bought a .dev for myself a while back (via a different registrar)

If it was in regards to the .zip TLD then I guess that is understandable, but .dev seems harmless IMO

Not exactly IMO, as containers themselves can simultaneously access devices and filesystems from the host system natively (such as VAAPI devices used for hardware encoding & decoding) or even the docker socket to control the host system’s Docker daemon.

They also can launch directly into a program you specify, bypassing any kind of init system requirement.

OC’s suggestion of a chroot jail is the closest explanation I can think of too, if things were to be simplified

About 150w total, trying to bring it down since electricity here is pretty expensive.

4 machines: two 4th gen i5, one 6th gen Nuc (Have two more but not set them up yet), and one HP thin client. Also two UPSes, and 3 cameras (previously four, but one was accidentally damaged).

Hosting Home Assistant, Zabbix, Palworld, SMB, Transmission, Plex and a bunch of other misc stuff.

Kind of contemplating moving everything to a 10th gen Nuc, but thinking a Ryzen based mini pc might be a better option

Seems to do so on stock Android (FP3)

Mute and vibration sound profiles are independent: I can enable DnD on my device and set it to loud, and it’ll still make noise on incoming calls and notifications. DnD just allows fine tuning of a lot of things related to those sound profiles, e.g. exempted apps, hiding notifications, illumimating the notification LED, toggling DnD on a schedule, emergency call bypass for certain contacts, what system sounds are permitted etc.

Persistent notifcation behavior is a bit different, but FB Messenger shouldn’t be using those… so I’m making the assumption that OP’s issue is due to the manufacturer modifying the DnD behavior on that android rom

Maybe iOS is different in this way

Wishlisted, this looks like it’ll be some cheap fun for my deck. Thanks for sharing 😁