• 0 Posts
  • 31 Comments
Joined 1 year ago
cake
Cake day: June 13th, 2023

help-circle





  • Someone more knowledge than me can correct me, but I’m pretty sure you could buy a newer bigger drive to replace an older drive. You obviously wouldn’t get the full capacity as it would be limited by the other older slower drives. However, you would get a, theoretically, more reliable drive than a random one on eBay. Then as you replace older drives eventually you could have increased size.

    Caveat is that it will put stress on the old drive to rebuild, however you’d get that with any drive you put in. General wisdom I saw says to replace all the drives. Although that can be expensive.

    I’m any case make sure you have a backup before you do any of the changes.



  • The lock itself is fine. I can do pretty much everything with the zwave once paired. Locking and unlocking are pretty quick and easy. You can setup a few different numbers too (haven’t played with it too much once setup). It has a sensor to detect if the door is open, but it’s pretty slow. Sometimes I can open and close the door before it knows it’s open. More of a door left open sensor.

    Our door lock it well aligned, but it’s yours is off I could see it being an issue, but that’s any motorized lock.

    Battery life seems pretty good considering we use the lock multiple times a day. Just 4 AA batteries I Believe. It also beeps at you when you lock/unlock before it dies so you have a fair warning.










  • You might be able to make some basic framing without any sheating without a permit. Then hang your cabinets on that. Best would be to ask your local permit office though. Any new power runs will need a permit regardless.

    However, I will say if you want to do any power wood cutting then you’ll want to enclose it real well. (ask me how I know, actually on second thought, don’t lol)